Will Magic Eraser Scratch Glass? (CookTop, Shower, Car, etc)

There’s no denying that Magic erasers can get you rid of those tough stains on your bathtubs, remove scuff marks from furniture, clean kitchen grease stains and even remove crayon stains on the wall.

But with its slight abrasiveness, will the magic eraser cause any scratches when used to clean as delicate of a surface as glass?

In this article, we’re going to answer most of your questions about using the magic eraser on different glass surfaces such as Glass cooktops, glass shower doors, automobile glass, and frosted glass. We’ll also give you better ways of cleaning these glass surfaces.

Will Magic Eraser Scratch Glass?

A magic eraser will not scratch glass. The melamine foam material it is made from has micro scrubbers that give the product its sandpaper-like abrasiveness.

However, this abrasive property isn’t harsh enough to cause any damage to a glass surface, so you can get rid of tough stains on your glass surfaces.

Although, Magic eraser is safe to use on glass surfaces, you should be careful if you’re trying to use it on stainless steel frames as magic eraser tends to scratch these surfaces.

Will Magic Eraser Scratch Glass Cooktop?

A magic eraser cannot scratch a glass stovetop, so you can use it to remove all the grease and food stains on your stovetop.

Expensive home appliances like a glass stovetop should be protected from scratches that may occur during cleaning.

How to Use Magic Eraser on Glass Cooktops?

We know Magic erase will not cause any scratch on a glass stovetop, but an incorrect method can. So you still have to make sure that you know the correct cleaning method to use a magic eraser on that stovetop.

Here is the best way to safely clean your glass stovetop with a Magic eraser:

This method is quick and effective.

STEPS

Step 1: Wipe your stovetop with a towel to make sure it’s dry and to remove any surface debris and food particles that might be on it.

Step 2: Dip the magic eraser foam in water for a minute, then squeeze out the excess water.

Step 3: Using the Magic eraser, scrub the stovetop in a circular motion while making sure to apply light pressure. Do this until all the stains and specks of dirt disappear.

Step 4: Finally, use a wet towel to clean off any excess grime that’s left on the surface. Then let the glass air dry.

Magic Eraser Alternative for Cleaning Glass Cooktops

There’s no doubt that cleaning glass stovetops can be a bit tricky and, if you simply don’t feel comfortable using a magic eraser on your glass stovetop, then there is a better way to clean your stovetop that’s just as effective and way cheaper.

YOU’LL NEED

1- Paper towel
2- 1 or 2 towels
3- Hot water
4- Baking Soda
5- Dishwashing Soap
6- Soft sponge
7- Microfiber towel
8- Glove (Heat resistant)

STEPS

Step 1: To remove any substances that might be on the stovetop, wipe the surface with a paper towel.

Step 2: Soak one or two towels in hot water for a few minutes.

Step 3: While the towels are soaking, make a paste with a generous amount of baking soda, vinegar, and dishwashing liquid. This paste is the key ingredient, make sure it’s not too thin.

Step 4: Using a soft sponge, apply the paste on the stovetop evenly.

Step 5: Wear a protective glove and take out the soaked towels from the hot water and squeeze off excess liquid. Then cover the stovetop with hot towels.

Leave them for about 30 minutes.

Step 6: After time has passed, take off the towels. The combined steam from the towels and the effect of the baking soda mixture should’ve loosened up all the dirt and grime on the stove.

Step 7: Take the soft sponge and slowly scrub off the paste from the stove. Do this in a straight motion till all the dirt and stains are wiped off along with the paste.

Step 8: Finally, Using a microfiber towel, wipe off any excess dirt on the stove.

Now take a look at the smooth glossy shine on your clean stovetop.

Will Magic Eraser Scratch Glass Shower Doors?

Magic eraser will not scratch glass shower doors and it is a great cleaning tool to remove hard water stains, soap scum, and buildup from your shower doors without having to worry about damage.

However, it is still important to follow to right steps while using a magic eraser on your glass shower door and we are going to break down how to properly use it below.

How to Use Magic Eraser on Glass Shower Doors?

This is a failproof method that will clean your shower glass and ensure it is free of any damage and all you need is the magic eraser and some water.

STEPS

Step 1: Soak your magic eraser in some water and squeeze out any excess water from it.

Step 2: Rub the magic eraser sponge on the glass doors with gentle wipes, till all the dirt completely disappears.

Step 3: Buff the glass shower door dry with a microfiber towel to restore the shine.

Magic Eraser Alternative for Cleaning Glass Shower Doors

Having to use a magic eraser that you end up throwing away after every use might not be the best and most economical way to clean your glass shower doors and if you are looking for a better way to clean your shower doors, then have a look at the steps below.

This method is easy and only uses a few materials you can easily get your hands on.

YOU’LL NEED

1- Distilled vinegar
2- Spray bottle
3- Soft sponge
4- Microfiber towel

STEPS

Step 1: Add some distilled vinegar into a spray bottle and spray all over the shower door and let it sit for a few minutes.

Step 2: Scrub the shower door with a soft sponge until all the buildup and stains are loosened up.

Step 3: Rinse the shower door with water to wash away all the loosened dirt and grime.

Step 4: Buff the glass shower door dry with a microfiber towel and your shower’s sleek shine will be restored.

Note: When it comes to glass shower maintenance, prevention is key. One of the best ways to prevent soap scum and hard water buildup on your glass shower doors is to slowly wipe down your shower doors with a squeegee after every shower.

Caution: Don’t use pumice stones on glass shower doors, as they can scratch the glass.

Magic Eraser on Frosted Glass

Magic eraser is safe to use on frosted glass surfaces because it is not abrasive enough to cause any scratches or damage to the glass. You can use a magic eraser to scrub away all the smudges and stains on your frosted glass.

How to Use Magic Eraser on Frosted Glass?

When cleaning your frosted glass surfaces with a magic eraser, you still want to make sure you are doing it right to avoid any overly abrasive action.

Follow the steps below:

Step 1: Soak the magic eraser in water before use.

Step 2: Squeeze out all the excess water from the eraser sponge.

Step 3: Applying light pressure, scrub the frosted glass surface with the magic eraser till all the dirt disappears.

Magic Eraser Alternative for Cleaning Frosted Glass

While a magic eraser may be great, it is not the only available cleaning option to maintain your frosted glass and we’ve got a better method that will remove stains.

YOU’LL NEED

1- Spray bottle
2-White distilled vinegar
3- Dishwashing liquid
4- Water
5- Soft sponge
6- Microfiber towel (2)

STEPS

Step 1: Mix equal parts vinegar, dishwashing liquid, and water in a spray bottle.

Step 2: Spray the mixture on the frosted glass surface.

Step 3: Using a soft sponge, scrub the glass in circular motions till all the dirt slowly comes off.

Step 4: Next, use a wet microfiber towel to wipe off all the excess sprayed mixture and dirt.

Step 5: Use another dry microfiber towel to buff the surface dry.

Will Magic Eraser Scratch Auto Glass?

A magic eraser cannot scratch car glass and it is a great option to get rid of any type of stain or dirt trapped on your auto glass.

Keeping your windshield and auto glass clear and dirt-free is very important for visibility and safety while driving.

How to Use Magic Eraser on Auto Glass?

Although a magic eraser is safe to use on auto glass, it is still essential to know how to do it properly as the wrong usage methods could lead to damage.

Here are the steps to follow:

Step 1: Soak the magic eraser in a little water or any glass cleaning solution of your choice.

Step 2: Squeeze the magic eraser to remove any excess water or cleaning solution.

Step 3: Now, lightly scrub the glass in a circular motion. Make sure not to apply too much pressure. Do this for both the inside and outside the glass.

Step 4: Finally, take a microfiber towel and wipe off any excess liquid from the car glass. You will notice that your auto glass is completely clean.

Note: Do not use a magic eraser on tinted auto glass because it is very prone to damage.

These same steps can be applied to clean car windows, which are essentially made of the glass itself.

Magic Eraser Alternative for Cleaning Auto Glass

If you have tinted glass or are just looking for a better method of cleaning your auto glass. Then we have a great option you can use:

YOU’LL NEED

1- Glass cleaning solution
2- Microfiber towel (2-3)
3- Warm water
4- Clay bar

STEPS

Step 1: Spray a glass cleaning solution of your choice onto the car glass. Make sure the cleaning solution is free of any harsh chemicals like ammonia.

Step 2: Using a microfiber towel, wipe the glass in circular motions. Ensure to clean all the corners around the glass.

Step 3: Spray a generous amount of warm water on the auto glass. Then use a small piece of a clay bar to wipe and slide all over the glass. This will remove any contamination.

Step 4: Spray the glass cleaning solution on the glass once more and wipe it down with the microfiber towel.

Step 5: Finally, use a clean microfiber towel to wipe and buff the glass. Now take a look at the smooth shiny glass on your car.

Things to Remember When Using Magic Eraser

Magic erasers are the ultimate multipurpose cleaning tool, but when using them, there are a few key things to keep in mind:

1- Do a patch test on any surface you intend to use the magic eraser on beforehand, to make sure it won’t cause any damage.

2- Wet the magic eraser to activate the tough micro exfoliants embedded in the foam.

3- Apply light pressure if you are using it on glass surfaces.

4- Put on gloves when working with a magic eraser as it could be potentially too abrasive for some skin types.

Abrasives & their effect on Glass!

1- Pumice stones can be effective for removing stains from glass.
2- Scotch Brite pads can leave subtle scratches on glass surfaces.
3- Steel wool (Coarse grades) will scratch the glass surface. However, Brillo pads can be used with light pressure on glass surfaces.

Conclusion

Magic eraser is great for cleaning tough stains on so many different surfaces and its incredible powers extend to properly cleaning glass surfaces as well (even your bathroom mirrors).

We have discussed the most common glass surfaces and also shown you the steps to properly use magic erasers on them. We have also given alternates (better methods) to clean those specific glass surfaces.