How to Clean Your Tile Floors – 7 Easy Steps

How to Clean Tile Floors

You just installed your tile floor.
That’s amazing!
But, keeping that floor sparkling and ever beautiful is a pain in the rear. This is especially true when you don’t know the specific methods to clean these kinds of floors.
So, Now what?

I have tried to put the most comprehensive information for you here on cleaning your tile floors. By the time you reach the conclusion, you would have become a pro at it.

Your choice of going with the tile was awesome because it is durable and has an impenetrable glaze that offers easy cleaning of the tiles as water, other liquids, and dirt often remains on the top.

Still, the floor doesn’t clean itself. Even with regular cleaning, your tile floors will still look dull without the right techniques and tools. Worse still, you might even damage your tile floor if you use the wrong cleaning techniques.

Let’s get started!

Items Needed to Clean your Tile Floor

– Broom
– Dustpan
– Microfiber cloth
– Steam mop
– Bucket
– Chamois Mop
– Upright vacuum

A Word of Caution Before Starting

You should be wary of the mop you choose. In general, keep off sponge mops. They often push dirt and dust into the grout lines. Choose mops that pick the dirt instead of pushing them under the grout. Chamois mop for tile floors offers good results.

When it comes to steam mops, always remember that continued use could damage your grout. Therefore, steam mops are not the best option for cleaning your tile floors. However, you can occasionally use them as they are ideal for removing stubborn stains.

Note: You don’t have to use chemicals when cleaning your tile floors. There are some safer and more convenient options. I am going to discuss them later.

How to Clean Your Tile Floors – 7 Easy Steps

Before we delve deeper, I recommend a spot test on your tile floor. Pick a small section of the floor and test the cleaning products you plan to use. That way, this guide will be of more benefit to you. Spot tests prevent damage to the entire floor in case you are using harsh chemicals.

Although different floors require different cleaning techniques, there are some basic requirements for all of them. Below are the steps to clean your tile floors:

1- Clear Away the Dirt & Loose Dust

This is the first step when you are cleaning your tile floor. Using a broom and a dustpan, sweep the surface and remove all the dirt and dust. You can also use a soft-bristled brush.

2- Use an Ideal Cleaning Solution

After removing the dust and dirt, add some cleaning solution into warm water. Of course, the cleaning solution to be used depends on the floor type. In our case, choose the appropriate solution for tile floors.

Always check the manufacturer’s recommendation before buying. Most manufacturers indicate the floor types for their products.

3- Mop the Tile Floor

It is at this point that the Chamois tile floor mop works wonders. However, there are other options out there in the market as well. In this step, you will need to use water.

Dip the mop, then squeeze it to remove excess water. After that, you will have a damp mop. Now use it to clean any stains off your tile floor.

4- Regularly Change the Bucket Water

This is a no-brainer. You can’t clean your floor with dirty water, can you? When cleaning your tile floors, you should regularly change the dirty bucket water.

That way, you are making sure that the dirt in the old water is not getting on the floor again.

5- Dry the Tiles

After you are done cleaning and moping the tiles, the next thing is to dry. When drying your tile floors, I recommend the use of microfiber cloths. They are perfect for drying your floor immediately after washing. Drying the floor also prevents water spots.

6- Clear Any Soap Residue

After you are done with all the steps, it is good to check and ensure there are no soap residues on the surface. After all, the aim of cleaning your tile floor is to have a clean and spotless surface.

If you notice any haze or soap residue on the surface, wipe it off. You can use a spray or a multipurpose cleaner for this task. Of course, ensure the cleaner is safe for use. It should be non-abrasive. After removing any soap residue, wipe the floor once again.

7- Clean the Grout

We have been talking about cleaning tiles themselves. But the tiles have grout. It’d be unreasonable to have a clean surface with dirty grout. How do you clean the grout? Since cleaning grout is an entire procedure, I will highlight it below.

A Few Extra Tips

While some people prefer cleaning the entire tile floor at once, others like cleaning one spot at a time. I recommend the latter.

This is because you get time to clean one section with less hassle. Cleaning the entire area at once can be tedious and demanding. Focus on a small area and then move to the other parts.

Now you have the basic knowledge of how to clean your tile floors. However, there are different tile materials available out there. Therefore, it all boils down to the type of tile floor you are cleaning. Is it porcelain, ceramic or natural stone? Each of these floor tiles requires specific cleaning items.

Here’s a quick recap of the process:

1- Clear away the dirt and loose dust using a broom and dustpan.
2- Use an Ideal Cleaning Solution.
3- Mop the Tile Floor with a damp mop, preferably chamois tile floor mop.
4- Regularly change the bucket water.
5- Dry the tiles using a microfiber cloth.
6- Clear any soap residue with a multipurpose cleaner.
7- Finally, Clean the Grout

Cleaning Ceramic Tile Floors

When cleaning ceramic tile floors, use the main procedure outlined above. But additionally, you will have to figure out the type of ceramic tile – whether it is glazed or not. You can use a low VOC cleaner or concentrated neutral pH product.

What is the Best Cleaning Solution for Ceramic Tile Floors?

Like mentioned earlier, it all depends on the floor type. It could be glazed or unglazed. For glazed ceramic tile floors, use low VOC household cleaning solutions. That way, your floor remains safe and protected.

However, cleaning the ceramic tiles around showers and bathtubs uses a cleaner that gets the scum out. Of course, you should never use harsh chemicals with elements like ammonia or acids. Such chemicals damage the floor. They can even damage the grout.

For unglazed ceramic tile floors, it is recommended that you use concentrated PH-neutral products. Such products will promise the safety of the ceramic floor.

An Alternative

If you want to clean your tile floors without using chemicals, you can use a mild detergent with a Chamois floor cleaning mop. The aim is that our cleaning solution should be free of acids or ammonia. It should be safe and secure for use.

Cleaning Porcelain Tile Floors

How do you clean porcelain tile floors? Is it the same as cleaning ceramic tile floors? Yes, the process remains almost the same.

Which Products to be Used

Just like ceramic, porcelain floors are either glazed or unglazed.

For glazed porcelain floors, use warm water and a multipurpose cleaner. Ensure the products you pick have no acids or ammonia. We know ammonia and acids damage the floor and the grout.

For unglazed porcelain floors, use concentrated pH-neutral cleaners. Just ensure the cleaners are compatible and are indicated by the manufacturers.

Cleaning Marble or Natural Stone Tile Floors

Important Instructions

As for the tile floors made using marble or natural stone, you should be very careful. Natural stone and marble are very porous. Therefore, they require care when cleaning.

1- You should never use acidic cleaners when washing your marble or natural stone floors.

2- Additionally, avoid products that have vinegar or lemon.

3- It is also important that you avoid any tools that might scratch the surface. Brushes and brooms should have soft bristles.

4- You should never use metal or hard bristles.

5- There are special stone cleaners available on the market. I recommend using them when cleaning natural stone or marble tile floors.

As promised earlier, let me tell you about Cleaning your Grout. Here’s how you do it:

How Do You Clean Tile Grout?


1- Hydrogen Peroxide (1 cup)
2- Baking Soda (1 cup)
3- Spray Bottle
4- Toothbrush
5- Clean Cloth


1- Sprinkle some baking soda directly over the grout to fully cover it, Put some hydrogen peroxide in a spray bottle and spray the grout lines, until they are wet.

2- Let it for about 10 minutes.

3- After 10 minutes, scrub the grout with a toothbrush.

4- Now, Rinse the area thoroughly and use a clean cloth to wipe the tile floor clean.

Of course, spot testing is still recommended, even when cleaning the grout.

Sealing the Grout

Is it important? Well, sealing the grout is an important practice. It helps reduce the frequency of cleaning. In most cases, dirt accumulates in the grout lines when they are not sealed. However, once you seal the grout, dirt can’t accumulate anymore.

At least every year, you do seal the grout so that you do not have to clean them again and again. Grout sealant is a great solution for anyone who wants to avoid regular cleaning. However, at some point, you will still have to clean the grout.

How to Seal Grout?

It is simple!

1- First, clear away any dust and debris from the grout lines using a brush or a broom.

2- Sprinkle some water over the surface to see if some water beads are left behind. If so, then you should use a grout sealant to seal those spaces between the lines.

3- Apply the sealant over the grout lines. Ensure you fully cover the spaces that hold water and dirt particles.

4-Wipe away all the excess sealant and then leave the surface to dry.

DIY Cleaners for Tile Floors

Sometimes you just want to clean tile floors without using those harmful chemicals. It is possible to improvise ideas and still get the floors clean. You don’t have to buy cleaners. Below are some ideas on how to clean tile floors using improvised methods:

Use Dish Soap

Combining hot water with the usual dish soap is a safe way to clean your tile floor. The solution formed is mild and safe for your different cleaning needs. It won’t harm the surface. Scrubbing using the mixture washes away dirt and grime.

Create a Baking Soda Paste

This is another excellent way to get your tile floors clean.

Mix baking soda with some soap to form a paste. Then apply it on the tile floor and the grout lines. You can cover the paste and leave it for 24 hours. Then scrub it away using a brush.

That way, you will have a clean tile floor without costing you an arm and a leg.

Steam Cleaners

Steam cleaners also come in handy when you want to have a clean and neat tile floor. However, they are not good for daily use.

Steam cleaners might damage the floor if used daily. But you can use them occasionally. They are ideal for removing stubborn stains.

After all this discussion, you must be wondering about a machine that can clean your Tile Floors. Is there any? Yes, there are many!

Best Tile Floor Cleaning Machine

The market has several machines for cleaning your floor. However, not all brands offer excellent services. Which is the best brand? After detailed comparisons, We picked the Bissell spin-ware tile floor cleaner as the best product available out there.

This is an excellent floor cleaning machine designed for hard floors. It is safe for cleaning grout and sealant. The 28-ounce water tank offers adequate capacity for continuous cleaning. The unit includes some soft touch pads that are gentle on the surface. It is, therefore, perfect for all floor types. It removes sticky messes and stubborn stains.

Tile Cleaning FAQ

How Frequently Should I Clean My Tile Floor?

Well, this depends on a plethora of factors. However, it is recommended that you clean your tile floors at least once per week. That way, the floor doesn’t get damaged as excessive cleaning can damage the floor. Bathroom floors should also be cleaned more often for hygiene purposes.

How to Clean Tile Floors With Vinegar And Baking Soda

First, fill a bucket with warm water. Next, add 2 spoons of baking soda and vinegar. Now spray the mixture of vinegar and baking soda on the surface. After that, use a mop to clean the surface and remove any stubborn stains. After scrubbing the floor, rinse with water and dry it. However, if your floors are too dirty, this method might not be the most effective.

Vinegar can be used for your porcelain or ceramic tile floors. However, it isn’t good on the marble floor tiles. However, don’t use it too often. When using vinegar on floors, ensure you rinse completely. Leaving some traces behind might be harmful to the floor.

Can I Bleach Tile Floors?

Sometimes, you can use household bleach to clean tile floors. However, you should never use bleach on natural stone or marble floors, which are quite sensitive. If you are talking about porcelain and ceramic tiles, that’s not bad at all.

Choosing a Cleaner

Chemical cleaners?
Natural solutions?
Dry solutions?

– Each of the above cleaners comes with its benefits and disadvantages. For instance, chemical cleaners are versatile since they clean and also disinfect. Unfortunately, they also pose a risk to the environment and are harmful to your health. They are full of chemicals like ammonia. They also have some acids which affect your tile floor.

– On the other hand, natural solutions are safe. For instance, products like baking soda are safe and ideal for use. They pose less risk to people even when ingested. However, they might not be as effective as chemical cleaners.

– Dry solutions are perfect for cleaning stained surfaces. They are ideal for cleaning when you don’t want to cover large surfaces. You can use a standard pencil eraser to clean and remove shoe scuff from the floor.

So, you need to keep in mind your cleaning needs before choosing the type. Once you identify the right cleaner for deep cleaning, get down to work.


Now you know how to clean tile floors as well as the Grout.
In most cases, you should do a spot test. That way, you know if the cleaner is safe or not.
Some cleaners are acidic and may contain elements like ammonia. These cleaners are unsafe for use and should be avoided.
I hope this guide was helpful to you. Would you like to drop a comment below?

facts about cleaning x
facts about cleaning

Leave a Comment

Your email address will not be published.